BrightStar Products

BRIGHTSTAR SOLAR WATER HEATER

" It is a complete solution for getting natural hot water with the help of sunlight and BrightStar solar system. No electric bills to pay, no electrical hazards. Since this instrument is placed on the top of buildings no need of space inside the house is required. Only initial cost is needed. With this system we get 24 hours hot water. It is mainly used in houses, hospitals, factories, hotels etc. Muricken's supply different capacity solar water heaters. for the last 30 years " Central Government MNRE ( ministry of natural renewable energy ) providing subsidies for all type of solar water heaters through ANERT.

BRIGHTSTAR SOLAR WATER HEATER FEATURES:

► Maintenance free.
► Water heated up to 80°C.
► No electrical hazard.
► No expenses after installation.
► The best way of getting natural hot water for cooking and industrial purpose
► Copper capillaries.
► PUF system and glass wool to avoid conduction loss for storage tank.
► Light weight.
► T I G welded fins and tubes.
► Compact in size.
► Heat expulsion.
► Fully automatic.
► High quality tempered 4mm thick front glass.
► Sturdy and weather proof design.
► Different Capacity starting from 125 liters to 10,000 liters.
► Custom built Solar Water Heater can also be provided.
► Two models FPC and ETC.
► In FPC special model we can connect pressure pump.

BRIGHTSTAR SOLAR FPC WATER HEATER TECHNICAL SPECIFICATION:

BrightStar Solar Water  Heater FPC Model 125 150 250 500
Usage No. of person    5 or 6 6 or 7 10 12
Installation Area(sq. mt) 4 4.5 8 16
Water output temp. (° C) 85 ± 5 °C under normal Sunny conditions
FPC capillary tube Model:        
No. fins 9 9 18 36
Collector Material Copper
Collector Box        
Coating Extruded Aluminum Powder Coated
Collector Size 2050 mm x 1050 mm x100 mm
Insulation 48 Kg/Cu,metre density Rock wool slab for standard model
box back sheet Aluminum sheet
Solar Collector Absorber        
Coating Selective black chrome – Nalsun
Insulation cover material Aluminum sheet
Bonding between fin        
And riser Metallurgical bonding
Header 99.9 %   copper  1"   , 22 SWG
Riser 99.9 %   copper  ½ "   24 SWG
Hot Water Tank        
Tank type Cylindrical – horizontal
Tank material (Inner) Stainless Steel SS 304 (Food Grade) - 0.9 mm
Insulating material for tank 48 Kg/Cu,metre density Rock wool slab for standard model
Electric Heater (optional) No need -     if need 2KVS 
 Pressure pump model is available   *Specifications are subject to change without prior notice".

100 litter to 5000 Litter

BRIGHTSTAR EVACUATED TUBE SOLAR COLLECTORS (ETC ) WATER HEATER

Second one is evacuated tube thermal collectors ( ETC technology )which are made up of rows of parallel, transparent glass tubes. Each tube consists of a glass outer tube and an inner tube called absorber which covered with a selective coating. The demerits of this type are we get only very low temperature, that is heat up 40 ± 5 °C, more chance of brakeage of tubes when it is exposed to sunlight, water leakage on glass joints, chance to catch fungus inside the tube and consequently lower the heat of water.On rainy season must use electrical heater

ETC BRIGHTSTAR SOLAR WATER BOILER HEATER FEATURES:

►Easy to carry and install.
► Water heated up to 45°C.
► The best way of getting natural hot water for cooking and industrial purpose
►Evacuated glass tube collector
►PUF system and glass wool to avoid conduction loss for storage tank.
► Light weight. Compact in size.
► Heat expulsion. ? Fully automatic.
► Sturdy and weather proof design.
►Different Capacity starting from 100 liters to 1000 liters.
►Custom built Solar Water Heater can also be provided.

BRIGHTSTAR ETC THERMAL SOLAR WATER HEATER TECHNICALSPECIFICATION

BrightStar Solar Water  Heater ETC Model 100 150 200 250
Usage No. of person 3 or 4 5 or 6 8 10
Installation Area(sq. mt) 2.1 3.1 3.8 4.7
Water output temp. (° C) 40 ± 5 °C Under Normal Sunny Conditions
ETC tube Model: No. of Tubes 14 20 28 34
Material Glass 3.3
Coating Selective Absorptive Coating
Glass Sealing Silicon Rubber
Hot Water Tank material (Inner) Stainless Steel SS 304 (Food Grade) - 0.5 mm
Thermal Insulation PUF Insulation
Electric Heater (optional) 2.0 KW with Thermostat

100 litter to 1000 Litter

APPLICATIONS
►In Restaurants Clubs & Resorts
►In Hospitals Hostels Institutions
►In Canteens and Laundries
►For Swimming pool water heating
►In most Process Industries
►In Green buildings to earn renewable energy points
►As In feed hot water to Boilers
►For Can washing at Dairy collection centers
►General washing & cleaning purposes
►In Agricultural sector

INSTALLATION GUIDELINES

1. Unobstructed sunlight (Shadow free area)
2. Flat (Preferable) or sloping roof area as requested
3. Area should be near to point of usage (bathroom / kitchen) : to avoid long hot water piping and heat losses
4. The system (solar collectors) should face south direction
5. Fresh (cold) water tank at a height @ 5-7 ft above the system tank height 6 .3 to 5 years guarantee, onsite after sales service

BrightStar Servo Stabilizer

"A complete solution for voltage fluctuation. Fully automatic.. Voltage stability is essential for all costly equipments for its smooth functioning. It is used in computer centers, colour labs, laboratories, scanning centers, factories, operation theaters etc. BrightStar servo stabilizer provides a constant out put voltage of 240v -450v. "
There are two models of Murickens Trading Company BrightStar Servo Controlled Voltage Stabilizers available.
The first model is Standard (160-270V). Wide range (120-270V) for single phase working range from 90 V and the second model is Standard (280-450V). Wide range (240-450V) for three phase working range from 180 V Single phase and tree phase

Two models: -

Standard (160-270V). Wide range (120-270V) for single phase working range from 90 V
Standard (280-450V). Wide range (220-450V) for three phase working range from 180 V
Maintains constant voltage output 230V for single phase and 450V for tree phase

BrightStar SERVO STABILIZER FEATURES:

► It act as a guard for every electronics equipments
► Quick, steady and accurate correction of voltage output 230V for Single phase and 400V for Three phase.
► Despite load current variations - Balanced output voltage.
► Irrespective of input imbalance.
► Fully automatic.
► Reduces heating and minimizes losses.
► Over Load Protection.
► Constant temperature maintained by oil or air cooling system
.► Boost-up transformer based model
.► Digital display for input and out put volt & irregularities.
► By using servo stabilizer we can improve over all production quantity and quality.
► In medical field, it is must for getting accurate lab test results.
► Overall energy saving - above 98% efficiency Increased life of your equipment.
► Compact in size, etc.
► Custom made servo voltage stabilizers available as per customers requirement.
► Some of the extra adoptable features are Bypass Mechanism ( change over switch ) Inbuilt Isolation Transformer, Time Delay, Wheel mounting.

TECHNICAL SPECIFICATION OF SERVO STABILIZER:

Sl.No. Parameter Single Phase Unit Three Phase Unit
1 Rating 1 KVA to 15 KVA 6 KVA to 100 KVA
2 Input Voltage Range a) 160V -270V (Standard) 280-450V(Standard)
    b)120V-270V(wide-range) 220V-450V(wide-range)
3 Nominal Output Voltage 230V 400V
4 Output Voltage Accuracy ± 1% ± 1%
5 Line Frequency Variation 47Hz-53Hz . 47Hz-53Hz
6 Control Digital/Analogue Digital/Analogue
7 Response Time 10 ms. 10 ms.
8 Voltage Correction Rate    
  1. Air Cooled 35V/Sec. 35V/Sec.
  2. Oil Cooled 25V/ Sec 25V/ Sec
9 Efficiency 97% 97%
10 Protection a) Automatic Switch-Off against  
       -  Under / Over-Voltage  
       -  Over-Load & Short - Circuit  
       -   Single Phasing  
11 Winding Copper Winded Copper Winded
12 Waveform Pure Sine Wave Pure Sine Wave
13 Power factor Nil Nil
14 Mounting Free on wheel Free on wheel

Typical Applications :- Which is commonly used in places where controlled and constant voltage, like Hospitals, Laboratories, various life saving & testing equipments, pharmaceuticals, Research Institutes, Data Processing Units, Food Processing Units, Offices and residences/ housing apartment etc.

BrightStar Freezer

A device described as a "refrigerator" maintains a temperature a few degrees above the freezing point of water; a similar device which maintains a temperature below the freezing point of water is called a "freezer". Our present generation is more conscious about power consumption. With proud we can say that Murickens are the first manufacture of body condensing freezer in India with very low power consumption that one can think. We have developed our New Generation Freezers, which can save so much power. It is taking only 1/5th of power as compared to other market freezers. It tested and proved in Kerala market since 1992. Murickens Mg freezer is a versatile freezer with user needs in mind. It has different temperature settings for different types of the medical, industry, pharmacy, biotech , clinical applications and food items like meat, ice cream, water bottles, milk, boiled items etc… It can reach up to minus 40o C so that the taste of food articles stored is never lost. Other refrigeration products are mobile mortuary, water cooler and air conditioners These products are also famous in low power consumption..



BRIGHTSTAR FREEZER FEATURES:

► Low power consumption (1 to 2.5 units per day).
► The main advantage is choice of door for water/milk cooler or freezer in single freezer ( 3-in-one ).
► Maintenance free system based on American technology.
► PUF System.
► Light weight.
► Fully automatic.
► Uniform cooling guaranteed by using copper capillaries.
► Fast freezing.
► Special design retains cooling for a longer period during power failures.
► Special design and technology ensures longer compressor life and uniform performance throughout the lifespan.
► Separate containers.
► Single, double, triple door or four door.
► Galvanized steel sheet outer body.
►Top cover and door Pure steel.
► Special model can reach up to minus 40oC.
►Body condensing and no extra condenser unit/condenser cooling fan.
► Compact in size and attractive color.
► Wheel mounted if needed.
► Power and cut off indicator.
► Adjustable thermostat (range -30 to -20) or digital meter.
► Provision for inner partition.
► Special model for sharja shake business.

Customer's specific models are available with the capacity of 100 liter to 600 liters in low power consumption , we successfully depalap mobile freezers to use and carry ice-cream and other meet products from place to place with out changing the neutrality vehicles like autoriksha, minivans ect… it will get 12 hour back-up (with out power supply ) with natural taste,another special freezer sharjah shake business

TECHNICAL SPECIFICATION BrightStar FREEZER:

                                                       BrightStar FREEZER       
Model 100 Liters 150 Liters 200 Liters 300 Liters 400 Liters 500 Liters
Input current  200v/240v 200v/240v 200v/240v 200v/240v 200v/240v 200v/240v
Compressor  watts 113/125w 113/125w 113/125w 159/193w 320/335w 320/335w
S.steel top & Door  Single Double Double Triple Four Door Four Door
Length 62cm 102cm 116cm 152cm 185cm 190cm
Width 54cm 56cm 56cm 56cm 61cm 63.5cm
Height 90cm 80cm 80cm 80cm 80cm 80cm
Gass R134 R134 R134 R134 134 134
 Power Consumption Standard Condition 1  unit/day 1 to 1¼ unit/day 1¼ to 2 unit/day 2 to 2½ unit/day 2½ to 3½ unit/day 3½ to 4
Stabilizer  500 va 500 va 500 va 1 kva 1 kva  2 kva
Cooling coil                                                     pure copper     
                         Above body dimensions will change in combined freezer

BrightStar MOBILE MORTUARY

We have two types of mortuary. The difference is in shape and material of top cover. First one is "U" shaped single Curved Acrylic sheet with 12 mm thickness and second one is pure glass. Hence we can view the entire body from different angles. Body of BrightStar freezer is made fully of stainless steel and copper. By using imported compressor it saves power and assures long life performance. BrightStar mobile mortuary is one of the most popular products in India with ISO certificate.

BrightStar MORTUARY FEATURES

► US Technology with low maintenance.
► Dead body can be preserved for longer periods.
► Stainless Steel stretcher.
► Mortuary body made-up of full pure Stainless steel and copper which provide complaint free working and long life.
► View from all angles.
► Fully automatic
► Separate on-off switch for voltmeter ,lights and compressor.
► Full PUF system (New technology).
► Inner side light.
► Top door opening with side view Acrylic/Glass ( optional ).
►Attractive top door handle 4 No.
► Light weight and compact size.
► Noiseless functioning.
► Wheel mounted (smooth and strong four wheels).
► Attractive look and long durability.
► Adjustable Digital display thermo meter.
►Input voltmeter. Temperature from -2oC to -20oC.

TECHNICAL SPECIFICATION OF BrightStar MOBILE MORTUARY:


              BrightStar MOBILE MORTUARY
Model  See through new
Input Watts 180/270w
Door Single unbreakable top opening with 12 cm acrylic/pure 
  glass 8mm (Optional)
Total length between 89 to 91.  inches  (229 cm)
Total height below  26  inches  (66 cm) + wheel 3"  to  4''
Total Width between 27 to 29  inches  (71 cm)
Mortuary Inside length 74.5  inches (189 cm) 
Mortuary Inside Width 22 inches  ( 57 cm)
Weight of  mortuary Below 100 Kg for fiber  and 130 Kg for glass top (without stretcher)
Compressor 325 W special
Temperature  Digital display, adjustable temperature
structure of the body Full steel and copper
Applicable generator 2000VA to 2800 VA
Applicable stabilizer 1.5 kva wide range special
Above dimensions will change , according to the model

BrightStar WATER COOLER

Features:

Natural cool water
Best quality plastic or steel front panel.
Different models and types
Low maintenance
Conveniently removable drip tray
Spill proof Bottle Holder
Low power consumption.
Compact in size.
Available capacity: - 5 liter to 100 liters

Murickens Trading Company Kurampala, Pandalam, Pathanamthitta, Kerala. Murickens Trading Company is one of the best manufactures of Solar Products, Inverter, UPS, Solar Street Light and Voltage Stabilizer etc.